Portable
Portable Mode 2 Charger
A portable Mode 2 charging cable with an integrated control and protection device (IC-CPD). Suited to domestic sockets, rental properties, road trips and temporary installations where a fixed wallbox is not practical. Adjustable charging current lets the user match the draw to the available circuit.
Key features
- Adjustable current in 6 steps, set directly on the control box
- Integrated IC-CPD with over-current, over-temperature and earth-fault protection
- Interchangeable plug types for EU, UK and North American sockets
- OLED status display showing voltage, current, power and elapsed time
- TPU jacketed cable rated for -30 C to +50 C outdoor use
Configurable options
1Select plug type
2Select current rating
3Confirm cable length
4Quote & lead time
Technical specifications
Power3.6 / 7.2 kW
Current8 / 10 / 13 / 16 / 20 / 32 A
InputSchuko / UK 13 A / NEMA 5-15 / NEMA 14-50
ProtectionIC-CPD, RCD + over-current
Cable5 m / 8 m, 3 x 2.5 mm2 + 2 x 0.5 mm2
IP RatingIP66 (control box)
StandardIEC 62752, CE
Certification on this product line: Portable charging for drivers who need to charge anywhere, without a fixed installation.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
AC Charging
Level 2 AC Wallbox 7-22 kW
A wall-mounted AC charging station for home, workplace, hotel and fleet overnight charging. Available in single-phase 7.4 kW and three-phase 11 kW / 22 kW versions, with or without a fixed cable, and with Ethernet, Wi-Fi and 4G connectivity options.
Key features
- Authorisation by RFID card, mobile app or plug-and-charge
- Integrated RCD type A with 6 mA DC leakage detection, avoiding a separate DC breaker
- Load balancing across multiple units on a single supply
- Optional 4G module for sites without fixed network cabling
- Scheduled charging and off-peak tariff windows set from the app
Configurable options
1Confirm phases & power
2Choose socket or cable
3Choose connectivity
4Quote & lead time
Technical specifications
Power7.4 / 11 / 22 kW
Input230 V 1-phase / 400 V 3-phase
ConnectorType 2 socket or 5 m fixed cable
Current16 A / 32 A per phase
ConnectivityWi-Fi, Ethernet, optional 4G
ProtocolOCPP 1.6J
ProtectionIP65, IK08, integrated RCD type A + DC 6 mA
StandardIEC 61851-1, CE, TUV
Certification on this product line: The workhorse of residential and destination charging, sized from 7 kW to 22 kW.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
DC Charging
DC Fast Charging Station 60-160 kW
An all-in-one DC fast charging station for car parks, retail sites, hotels and highway service areas. Single or dual gun configuration, with CCS1, CCS2, GBT and CHAdeMO connector choices to match the destination market. Liquid-cooled variants available for high-utilisation sites.
Key features
- Dynamic power sharing between two guns on dual-output models
- CCS1 / CCS2 / GBT / CHAdeMO connector options for different export markets
- Modular power stacks simplify field service and later power upgrades
- Built-in energy meter and remote diagnostics over OCPP
- Cable management and reinforced gun holster for outdoor installation
Configurable options
1Confirm power level
2Choose connectors
3Select cooling & payment
4Quote & lead time
Technical specifications
Power60 / 80 / 120 / 160 kW
Output150 - 1000 V DC, up to 200 A
ConnectorsCCS1 / CCS2 / GBT / CHAdeMO, single or dual gun
Display7-inch sunlight-readable touch LCD
PaymentRFID, QR code, POS terminal option
ProtocolOCPP 1.6J, ISO 15118 ready
ProtectionIP54, IK10
CoolingAir-cooled or liquid-cooled
Certification on this product line: All-in-one DC charging covering the 60 kW to 160 kW band used by most commercial sites.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
DC Charging
Compact DC Charger 20-40 kW
A compact DC charging unit for locations where a full 60 kW cabinet is oversized - dealerships, workshops, workplace car parks and fleet yards. Wall-mounted or pedestal versions, with a single CCS gun and either 20 kW or 40 kW output.
Key features
- Fills the gap between AC wallboxes and full DC cabinets
- Compact footprint suited to workshop and dealership bays
- Wide output voltage range covers 400 V and 800 V vehicle platforms
- Same back-office interface as the larger DC range
- Optional load management and scheduled charging
Configurable options
1Confirm power level
2Choose mounting style
3Choose connector
4Quote & lead time
Technical specifications
Power20 / 30 / 40 kW
Output150 - 1000 V DC
ConnectorsCCS2 or CCS1, single gun
DisplayOptional 4.3-inch LCD
MountingWall-mount or floor pedestal
ProtocolOCPP 1.6J
ProtectionIP54 / IP65 for outdoor versions
Certification on this product line: Compact DC charging for workshops, dealerships and fleet yards with limited space.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
DC Charging
All-in-One DC Charger with Battery Buffer
An all-in-one DC charging station with an integrated 93 kWh LiFePO4 battery buffer. The battery smooths the site load so a fast charger can be installed on a supply that would otherwise be too small, and it lets the station keep charging during demand peaks or short grid interruptions.
Key features
- Battery-buffered charging avoids a costly transformer or service upgrade
- Peak shaving keeps the site import within the contracted capacity
- Keeps charging during short grid interruptions
- LiFePO4 chemistry with 6000+ cycles and integrated BMS
- Monitor state of charge and site load from the same back office as the chargers
Configurable options
1Confirm site import limit
2Size the buffer
3Choose output power
4Quote & lead time
Technical specifications
Output Power60 / 120 kW
Battery93 kWh LiFePO4
Output150 - 1000 V DC
Grid ConnectionFrom 30 kW import
Cycles6000+ cycles at 80% DoD
ProtectionIP54, integrated BMS + thermal management
ProtocolOCPP 1.6J
Certification on this product line: Fast charging on a constrained grid, without paying for a supply upgrade.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
DC Charging
Liquid-Cooled Split DC 360-960 kW
A split DC charging system separating the power cabinet from the dispensers. Liquid-cooled cables carry up to 600 A so vehicles reach high state of charge quickly. Cabinets are stackable from 360 kW to 960 kW and the dispensers are placed where vehicles actually park.
Key features
- Liquid-cooled cables reaching 600 A for high-power charging
- Power cabinet stacked away from the parking bays, dispensers placed at the vehicle
- Dynamic power allocation across all dispensers from one cabinet
- Modular design allows staged expansion as the fleet grows
- Designed for bus depots, logistics yards and highway charging hubs
Configurable options
1Confirm fleet & duty cycle
2Size the cabinet
3Plan dispenser layout
4Quote & lead time
Technical specifications
Cabinet Power360 / 480 / 720 / 960 kW (stackable)
Output150 - 1000 V DC, up to 600 A
DispensersUp to 6, each with 2 guns
CoolingLiquid-cooled cable and power modules
ConnectorsCCS1 / CCS2 / GBT, MCS ready
ProtocolOCPP 1.6J, ISO 15118
ProtectionIP54, IK10
Certification on this product line: Highest-power architecture for bus depots, logistics fleets and highway hubs.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
DC Charging
Bidirectional V2G Charger
A bidirectional DC charger that both charges a vehicle and discharges it back, supporting vehicle-to-grid and vehicle-to-building applications. Suited to fleets with predictable duty cycles and to sites that need to shave peaks or provide backup power.
Key features
- Charges and discharges through the same CCS2 connector
- Supports vehicle-to-grid export and vehicle-to-building peak shaving
- Can provide backup power to a building during an outage
- ISO 15118 communication for plug-and-charge and smart charging
- Managed from the same back office as the rest of the charging estate
Configurable options
1Confirm grid agreement
2Size bidirectional power
3Configure V2G / V2B
4Quote & lead time
Technical specifications
Power30 / 60 kW bidirectional
Output150 - 1000 V DC
ConnectorCCS2
StandardISO 15118, IEC 61851-1
ModesV2G, V2B, backup power
ProtocolOCPP 1.6J
ProtectionIP54
Certification on this product line: Turns the fleet battery into a grid asset for peak shaving and backup power.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
Energy Storage
Mobile Charging Station 125 kW / 261 kWh
A mobile charging station combining a 125 kW DC charger with 261 kWh of LiFePO4 storage on a wheeled chassis. It brings high-power charging to locations with no grid connection, and provides temporary capacity for events, construction sites and seasonal demand peaks.
Key features
- Delivers 125 kW charging with no fixed grid connection
- 261 kWh LiFePO4 battery sized for roughly 30 - 40 full charges per deployment
- Towed or forklifted into position, operational within minutes
- Recharged overnight from an ordinary AC supply between deployments
- Used for events, construction sites, seasonal peaks and fleet emergencies
Configurable options
1Confirm site & events calendar
2Size the battery
3Plan recharge supply
4Quote & lead time
Technical specifications
Charging Power125 kW DC
Battery261 kWh LiFePO4
Output150 - 1000 V DC, dual gun
MobilityWheeled chassis, towable
RechargeRechargeable from AC supply or solar input
Cycles6000+ cycles at 80% DoD
ProtocolOCPP 1.6J
Certification on this product line: High-power charging that can be driven to wherever it is needed.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
Energy Storage
Home Energy Storage 10 / 15 kWh
A stackable home energy storage system built on LiFePO4 cells, with an integrated hybrid inverter, solar input and blackout backup. It stores surplus solar generation for evening use, shifts grid import away from peak tariffs, and keeps essential circuits live during an outage.
Key features
- Stores surplus solar for evening use instead of exporting it
- Shifts grid import away from peak tariff windows
- Backup changeover in under 20 ms keeps essential circuits live
- LiFePO4 cells with 6000+ cycles and integrated BMS
- Coordinates with a BESTAR AC wallbox for solar-surplus charging
Configurable options
1Confirm load profile
2Size battery & inverter
3Plan solar & backup circuits
4Quote & lead time
Technical specifications
Capacity10 / 15 kWh (expandable)
ChemistryLiFePO4, 6000+ cycles
InverterIntegrated hybrid, 5 - 8 kW
Solar InputUp to 2 MPPT trackers
BackupEssential circuit changeover, <20 ms
ProtectionIP65 wall-mount or floor stand
MonitoringMobile app, optional OCPP-linked charger control
Certification on this product line: Home storage that pairs with a wallbox to charge from the roof, not the grid.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
Components
Connectors, Cables & Power Distribution
The connector, cable and power distribution components that complete an installation. Supplied alongside the charger range so a project can be sourced from a single supplier, and available separately for installers maintaining existing sites.
Key features
- Connector and cable types matched to the destination market
- AC and DC distribution cabinets with integrated metering
- One supplier for chargers, connectors and distribution equipment
- Installation accessories available on the same order
- Spares and replacement cables supplied for after-sales service
Configurable options
1List the site equipment
2Confirm connector standards
3Specify distribution
4Quote & lead time
Technical specifications
ConnectorsType 1 / Type 2 / CCS1 / CCS2 / GBT / CHAdeMO guns
CablesType 2 to Type 2, 16 A / 32 A, 5 m / 8 m
DistributionAC and DC distribution cabinets, metering kiosks
ProtectionEnclosures with surge and earth-fault protection
AccessoriesPedestals, cable management, mounting kits
AccessVia BESTAR back-office platform
Certification on this product line: Everything around the charger, so a project ships as one complete package.. Test reports and declarations of conformity are supplied with shipment to support local market registration.
